| NE A 1-1T |
Coolant Composition in Pressurized Water
Reactors (3/81) |
| NE A 1-5T |
Purity Requirements for Operating
Sodium Reactor Systems (6/81) |
| Applied Technology Notice Removal |
Classification From Reactor Development
Technology (RDT) Standards (3/16/93) |
| NC C 1-1T |
Instrumentation and Control Equipment Grounding and Shielding Practices (w/amendment 1) (1/75) |
| NE C 4-4T |
Venturi Flow Tube for Liquid Sodium (8/74) |
| NE C 4-5T |
Permanent Magnet Flowmeter for Liquid-Metal Piping Systems (4/74)
|
| NE C 2-1T |
Determination of Insulation Compaction in Ceramic Insulted Conductors (w/amendment 1) (9/73) |
| NE C 2-3T |
Time Respnose Test for Sheathed, Mineral Insulated Thermocouple |
| NE C 4-6T |
In-Core Permanent-Magnet Flow-Through-Type Flowmeter for Liquid Metal Service (w/Amendments 1 and 2) (11/74) |
| NE C 4-7T |
Eddy-Current Probe Type Flow Sensor for Liquid Metal Service (6/73) |
| NE C 5-1T |
Inductive Level Measurement Sensor for Use in Liquid Metal (3/75) |
| NE C 5-2T |
Resistive Level Measurements Sensor for Use in Liquid Metal (w/Amendment 1) (10/71) |
| NE C 6-1T |
NaK-Transmission High-Temperature Pressure Transmitter for Liquid Metal Service (w/Amendments 2-5) (6/74) |
| NE C 6-3T |
Liquid Metal Pressure Measurement System, Flush-Mounted, Eddy Current Type, Inductive, Absolute or Gage (w/Amendment 1) (10/71) |
| NE C 7-1T |
Thermocouple Material, Iron and Constantan, Solid Conductor (Bare, Fiberglass Insulated, and Sheathed Over Fiberglass Insulation) (11/76) Replaced by ASTM E574-76 |
| NE C 7-2T |
Thermocouple Material, Iron and Constantan Magnesium-Oxide Insulated and Sheathed (4/70) Replaced by ASTM E608-78 |
| NE C 7-3T |
Thermocouple Material, Cooper and Constantan, Solid Conductor (Bare, Fiberglass Insulated, and Sheathed Over Fiberglass Insulation (9/76) Replaced by ASTM E574-76 |
| NE C 7-4T |
Thermocouple Material, Cooper-Constantan, Mineral-Oxide Insulated, Sheathed (w/Amendment 1) (1/73) |
| NE C 7-5T |
Thermocouple Material, Chromel-P and Alumel, Solid Conductor (Bare, Fiberglass Insulated, and Sheathed over Fiberglass Insulation) (1/73) |
| NE C 7-6T |
Thermocouple Material and Thermocouple Assembly, Chromel-P versus Alumel, Stainless Steel Sheathed, Magnesium Oxide Insulated (w/Amendment 1) (2/76) |
| NE C 7-14T |
Thermocouple Material, Chromel-P and Alumel, Solid Conductor (Bare, Fiberglass Insulated, and Sheathed over Fiberglass Insulation) (1/73) |
| NE C 7-15T |
Thermocouple Connectors and Thermocouple Connector Panels
(w/Amendment 1) (1/73) |
| NE C 7-16T |
Thermocouple Assemblies, Magnesium Oxide Insulated, Stainless Steel Sheathed (11/76) |
| NE C 7-17T |
Platinum Resistance Thermocouple (4/75) |
| NE C 7-18T |
Thermowell Systems for Liquid Metal Service (w/Amendments 1 and 2) (5/74) |
| NE C 8-2T |
Liquid Sodium Bearing Film Thickness, Variable Reluctance Transducer, Proximity Measurement System (1/76) |
| NE C 8-4T |
Electrical Continuity-Type Liquid Metal Leak Detector (w/Amendments 1) (6/73) |
| NE C 8-5T |
Electrochemical Oxygen Meter for Service in Liquid Sodium (1/72) |
| NE C 8-6T |
Hydrogen Meter for Service in Liquid Sodium (11/83) |
| NE C 8-7T |
Diffusion Carbon Meter for Service in Liquid Sodium (1/72) |
| NE C 8-8T |
Specimen Equilibration Device (or Multipurpose Sampler) for the Analysis for Nonmetals in Liquid Sodium (7/77) |
| NE C 10-1T |
Thermocouple Signal Transmitter (1/79) |
| NE C 10-2T |
Permanent Magnet Flowmeter Signal Transmitter (11/71) |
| NE C 10-4T |
Signal Summer (10/71) |
| NE C 10-5T |
Eddy-Current Flowmeter Power Supply and Signal Conditioning Electronics (2/73) |
| NE C 12-1T |
Gas Chromatograph System for Sodium Cover Gas Service (11/73) |
| NE C 15-3T |
Current Pulse Preamplifiers for Use with Fission Counters (w/Amentments 1 and 2) (10/74) |
| NE C 15-7T |
Gamma Compensated Ionization Chamber Assembly (Fixed Electrical Compensation) (w/Amendments 1 and 2) |
| NE C 16-1T |
Supplementary Criteria and Requirements for RDT Reactor Plant Protection Systems (12/69) |
| NE C 16-3T |
PPS Buffers (w/Amendment 1) (12/71) |
| NE C 17-1T |
High-Temperature Electrical Connectors and Hermetic Seals (3/70) |
| NE C 17-4T |
General Instrumentation (2/72) |
| NE C 17-5T |
Metal-Sheathed, Mineral-Insulated Cable Bulk Materials (w/Amendment 1) (4/74) |
| NE C 18-1T |
Ceramic Electrical Insulators (w/Amendment 1) (6/80) |
| Conversions 1989 |
Conversion of NE Standards to National Consensus Standards
Memorandum (7/89) |
| NE E 1-11T |
Rupture Disk Devices for Liquid Metal Systems (7/73) |
| NE E 1-18T |
Class 1 Valves for Liquid Metal Service (5/75) |
| NE E 1-19T |
Class 2 Valves for Liquid Metal Service (6/74) |
| NE E 1-35T |
Inert Gas Valves (5/72) |
| NE E 1-36T |
Floor Valve, Reactor Refueling and Maintenance for LMFBR (6/72) |
| NE E 2-3T |
Reactor Vessel for Liquid Metal Service (12/73) |
| NE E 2-4T |
Shield Plug and Closure Cap for Penetrations - LMFBR Reactor
Vessel Head (4/73) |
| NE E 3-2T |
Centrifugal, Free-Surface, Sodium Pump with Electrical Drive (5/71) |
| NE E 3-9Draft |
Electromagnetic Pump for Liquid Metal Service
(w/Amendments 1, 2, and 3) (2/77) |
| NE E 3-9 |
Electromagnetic Pump for Liquid Metal Service
(w/Amendments 1, 2, and 3) (3/71) |
| NE E 4-5T |
Forced-Circulation Cold Trap Assembly for Removal of Sodium Impurities (1/76) |
| NE E 4-6T |
Intermediate Heat Exchanger for Liquid Metal Systems (w/Amendment 1) (4/75) |
| NE E 4-7T |
Sodium to Air Heat Exchanger (w/Amendments 1-4) (1/74) |
| NE E 4-13T |
Freeze Vent for Sodium Service (w/Amendments 1 and 2) (12/71) |
| NE E 4-14T |
Vapor Trap Assemblies for Sodium Service (w/Amendments 1 and 2) (1/74) |
| NE E 4-16T |
Sodium-Heated Steam Generator (2/74) |
| NE E 4-19T |
Plugging Temperature Indicator Assembly for Sodium Service (4/75) |
| NE E 6-5T |
Collapsible-Rotor, Roller-Nut Control Rod Drive Mechanism for Sodium Service (w/Amendments 1, 2, and 3) (9/74) |
| NE E 6-13T |
Core Support Structure for Sodium Cooled Reactors (Fabrication Only) (1/72) |
| NE E 6-17T |
Core Restraint Mechanism for Sodium Cooled Reactors (Fabrication Only) |
| NE E 6-18T |
Instruction Tree for Sodium Cooled Reactors (Fabrication Only) (2/73) |
| NE E 6-19T |
Radial Reflector Assembly for Liquid Metal Fast Breeder Reactors (3/78) |
| NE E 6-23T |
Core Radial Shield for Sodium Cooled Reactors (12/71) |
| NE E 6-24T |
Interim Decay Storage for Sodium Cooled Reactors (4/73) |
| NE E 6-25T |
Control Rod Absorber Pin for Liquid Metal Fast Breeder Reactors
(w/Amendment 1) (1/77) |
| NE E 6-26T |
Fabrication of Control Rod Driveline for Sodium Cooled Reactors (4/73) |
| NE E 6-30T |
Absorber Pin Boron Carbide Pellet (9/76) |
| NE E 6-33T |
Control Rod Assembly for Liquid Metal Fast Breeder Reactors (w/Amendment 1) |
| NE E 6-34T |
Fabrication of Core Component Pot for Liquid Metal Service (3/72) |
| NE E 6-36T |
Low Level Flux Monitor Mechanical System for Liquid Metal Service (Fabrication Only) (7/72) |
| NE E 6-38T |
Low Friction Hard Surfaces for Core Components (w/Amendment 1) (9/73) |
| NE E 6-40T |
Piston Rings of High Strength Alloys for Core Components for Liquid Metal Service (5/74) |
| NE E 7-4T |
Mixing Component for Liquid Metal Piping Systems
(w/Amendments 1 and 2) (6/74) |
| NE E 7-6T |
Pipe Hangers, Supports and Snubbers for Liquid Metal Service (5/72) Replaced by DOE(NE) Standard E7-9 |
| NE E 7-8T |
Penetrations for Piping (4/72) |
| NE E 8-5T |
Ex-Vessel Handling Machine for Sodium Cooled Reactors (12/71) |
| NE E 8-11T |
FFTF Closed Loop In-Reactor Assembly Fabrication (12/71) |
| NE E 8-13T |
Oxygen-Hydrogen Meter Module for Service in Liquid Sodium (1/72) |
| NE E 8-14T |
Carbon Meter-Equilibration Module for Service in Liquid Sodium (1/72) |
| NE E 8-15T |
Fabrication of Plug Handling Fixture for Sodium Cooled Reactors (2/74) |
| NE E 8-18T |
Threaded Fasteners for Nuclear Components (9/81) |
| NE E 10-2T |
Guard Vessel for Primary Sodium Containing Components (11/70) |
| NE E 11-2T |
Filter for Sodium Service (1/73) |
| NE E 13-1T |
Ceramic Grade Plutonium Dioxide (12/81) |
| NE E 13-2T |
Ceramic Grade Uranium Dioxide (w/Amendment 1) (1/84) |
| NE E 13-3T |
Fast Flux Test Facility Uranyl Nitrate Solution (6/71) |
| NE E 13-4T |
Fast Flux Test Facility Plutonium Nitrate Solution (6/71) |
| NE E 13-5T |
Fast Breeder Reactor Fuel Pin (1/84) |
| NE E 13-6T |
Fast Breeder Reactor Mixed Oxide Fuel Pellet (W/Amendment 1) (1/84) |
| NE E 13-7T |
Fast Breeder Reactor Uranium Dioxide Pellet (1/84) |
| NE E 13-8T |
Fast Flux Test Facility Driver Fuel Pin Seamless Cladding Tube (6/71)
Replaced by ASTM A771-88 |
| NE E 13-9T |
Fast Flux Test Facility Driver Fuel Pin End Caps (6/71)
Replaced by DOE(NE) M7-23 |
| NE E 13-10T |
Fast Flux Test Facility Driver Fuel Pin Reflectors (6/71)
Replaced by ASTM B166-86 |
| NE E 13-11T |
Fast Flux Test Facility Driver Fuel Pin Plenum Spacer (6/71)
Replaced by ASTM A269-88 |
| NE E 13-12T |
Fast Flux Test Facility Driver Fuel Pin Plenum Spring (6/71)
Replaced by ASTM A313-87 |
| NE E 13-13T |
Fast Flux Test Facility Driver Fuel Pin Wrap Wire (6/71)
Replaced by ASTM A580-83 |
| NE E 13-16T |
Fast Breeder Reactor Assembly (1/86) |
| NE E 15-3T |
Insulation/Header Module-Piping (4/72) |
| NE E 15-2NB-TDraft |
Class 1 Nuclear Components (Supplement to ASME Boiler and Pressure Vessel Code, Section III, Subsections Draft) (8/83) |
| NE E 15-2NB-T |
Class 1 Nuclear Components (Supplement to ASME Boiler and Pressure Vessel Code, Section III, Subsections |
| NE E 15-2NC-T |
Class 2 Nuclear Components (Supplement to ASME Boiler and Pressure Vessel Code, Section III, Subsections |
| NE E 15-2ND-T |
Class 3 Nuclear Components (Supplement to ASME Boiler and Pressure Vessel Code, Section III, Subsections NCA and ND) (11/81) |
| NE E 15-2NE-T |
Class MC Nuclear Components (Supplement to ASME Boiler and Pressure Vessel Code, Section III,Subsections NCA and NE) (8/75) |
| NE E 16-1T |
Test Vehicles for Transient Reactor Test Facility (TREAT) Experiments Containing Sodium (8/74) |
| NE F 1-1 |
Preparation and Application of RDT Standards (w/Amendment 1) (6/77) |
| NE F 1-2T |
Preparation of Plant and System Design Description Documents (see conversion project FACR-0001) (1/89) |
| NE F 2-2 |
Quality Assurance Program Requirements (w/Amendments 1-7) (1/82) |
| NE F 2-4 |
Quality Verification Program Requirements (1/81) |
| NE F 2-6T |
Quality and Control of Analytical Chemistry Laboratories for Mixed Oxide Fuel Analysis (3/79) |
| NE F 2-7T |
Acceptance Sampling Plans (11/73) |
| NE F 2-8T |
Qualification and Control of Analytical Chemistry Laboratories for Control Rod Absorber Material Analysis (12/78) |
| NE F 3-1T |
Inspection System Requirements (Tentative, 2/69) (S-904) |
| NE F 3-2T |
Calibration Program Requirements (2/73) |
| NE F 3-3T |
Superseded by F3-6T (7/71) |
| NE F 3-4T |
Superseded by F3-6T (7/71) |
| NE F 3-5T |
Superseded by F3-6T (7/71) |
| NE F 3-6T |
Nondestructive Examination (Supplement to ASME Boiler and Pressure Vessel Code, Section V) (2/83) |
| NE F 3-7T |
Inspection Requirements for Materials Used in Reactor Coolant System Wear Applications) (10/67) |
| NE F 3-8T |
Superseded by F3-6T (7/71) |
| NE F 3-10T |
Nondestructive Examination for Reactor Core Components (w/Amendments 1 and 2) (7/80) |
| NE F 3-11T |
Mass Spectrometer Helium Leak
Detection for Instruments and Small Components (2/72) |
| NE F 3-15T |
Requirements for Inspection of
Dimensional Characteristics (8/73) Replaced by ASQC M1 (1987) |
| NE F 3-37 |
Special Requirements for Metal Products (5/74) |
| NE F 3-40T |
Methods for the Analysis of Sodium and Cover Gas (w/Amendments 1 and 2) Replaced by ASTM C997-83 |
| NE F 4-20T |
Operation and Maintenance Manuals |
| NE F 5-1T |
Cleaning and Cleanliness Requirements for Nuclear Components (1/78) |
| NE F 5-2T |
Cleaning and Cleanliness Control Program Requirements (1/70) |
| NE F 5-3T |
Component Cleaning Requirements (1/70) |
| NE F 5-4T |
Removal of Sodium from Systems
and Components (2/74) |
| NE F 5-5T |
Recommended Practices for Cleaning of
Nuclear Components and Systems (1/70) |
| NE F 5-9 |
Sodium Removal Processes (4/77) |
| NE F 5-10T |
Decontamination of Hot Leg LMFBR Components (2/84) |
| NE F 6-1T |
Superseded by E 15-2T and F 6-5T F 6-1T file and old drafts transferred transfile (1/70) |
| NE F 6-2T |
Welding of Reactor Core Components and Test Assemblies
(7/73) |
| NE F 6-5T |
Welding and Brazing Qualifications (Supplement to ASME Boiler and Pressure Vessel Code, Section IX) (3/83) |
| NE F 6-7T |
Weldability Tests for Materials (7/71) |
| NE F 6-10T |
Repair of Materials by Welding (7/71) |
| NE F 6-11T |
Fabrication and Installation of Piping Subassemblies for Liquid Metal Service (w/Amendments 1 and 2) (6/73) |
| NE F 6-14T |
Brazing Fabrication Requirements (7/71) |
| NE F 7-1T |
Continuous Identification Marking of
Components for Shipment and Storage (9/75) |
| NE F 7-2T |
Packaging, Packing, and Marking of Components for Shipment and Storage (w/Amendment 1) (1/76) |
| NE F 7-3T |
Marking of Components and Parts (w/Amendment 1) (10/78) |
| NE F 8-1T |
Preloaded Threaded Fasteners and
Closures (11/76) Replaced by EPRI NP-5067 (1987) |
| NE F 8-6T |
Hoisting and Rigging of Critical Components and Related Equipment |
| NE F 9-1T |
Requirements for Nuclear Components at
Elevated Temperatures (Supplement to ASME Elevated Temperature Code Case
1331) (4/73) |
| NE F 9-2T |
Seismic Requirements for Design of
Nuclear Power Plants and Nuclear Test Facilities (2/85) |
| NE F 9-4T |
Requirements for Design of Class 1 Elevated Temperature Nuclear System Components (Supplement of ASME Code Case N-47) (see conversion project GDRQ-0002) (6/86) |
| NE F 9-5T |
Guidelines and Procedures for Design of Class 1 Elevated Temperature Nuclear System Components (See conversion project GDRQ-0003) (9/86) |
| NE F 11-1T |
Analytical Chemistry Methods for Mixed Oxide Fuel (3/85) |
| NE F 11-2T |
Analytical Chemistry Methods for Boron
Carbide Absorber Material (3/85) |
| NE F 11-3T |
Analytical Chemistry Methods for Metallic
Core Components (3/85) |
| NE F 11-4T |
Determination of a Figure of Merit for PuO2-UO2 Fuel Pellet Homogeneity by Use of an Electron Microprobe (9/72) |
| NE F 11-5T |
Determination of Fuel Pellet
Homogeneity by Alpha-Autoradiography |
| NE F 11-6T |
Ceramographic Preparation of Mixed Oxide Fuel Pellets Replaced by ASTM C994-83 (1/73) |
NE M 1-1T |
Stainless Steel Covered Welding Electrodes (ASME SFA-5.4 with Additional Requirements) (8/82) |
| NE M 1-2T |
Stainless Steel Welding Rods and Bare Electrodes (ASME SFA-5.9 with Additional Requirements) (8/82) |
| NE M 1-3T |
Mild Steel Covered Welding Electrodes
(ASME SFA-5.1 with Additional Requirements) (8/82) |
| NE M 1-4T |
Low Alloy Steel Covered Welding
Electrodes (ASME SFA-5.5 with Additional Requirements) (8/82) |
| NE M 1-5T |
Welding Rods and Electrodes, Surfacing (ASME SFA-5.13 with Additional Requirements) (4/82) |
| NE M 1-6T |
Mild Steel Electrodes for Gas Metal-Arc
Welding (ASME SFA-5.18 with Additional Requirements) (8/82) |
| NE M 1-9T |
Brazing Filler Metal (ASME SFA-5.8 with
Additional Requirements) (10/81) |
| NE M 1-10T |
Nickel and Nickel Alloy Covered Welding
Electrodes (ASME SFA-5.11 with Additional Requirements) (10/81) |
| NE M 1-11T |
Nickel and Nickel-Alloy Bare Welding
Rods and Electrodes (ASME SFA-5.14 with Additional Requirements) (10/81) |
| NE M 1-15T |
Nickel-Molybdenum-Chromium Alloy Bare
Welding Rods and Electrodes (4/77) |
| NE M 1-17T |
Bare Carbon Steel Electrodes and Fluxes
for Submerged Arc Welding (ASME SFA-5.17 with Additional Requirements) (8/82) |
| NE M 1-19T |
Nickel-Chromium-Molybdenum-
Columbium Bare Welding Rods and |
| NE M 1-20T |
Mild Steel Electrodes for Flux-Cored Arc
Welding (ASME SFA-5.20 with Additional Requirements) (8/79) |
| NE M 1-22T |
Bare Low-Alloy Steel Electrodes and
Fluxes for Submerged Arc Welding (ASME SFA-5.23 with Additional Requirements) (10/82) |
| NE M 1-23T |
2-1/4%-Chromium, 1%-Molybdenum Alloy Bare Welding Rods and Electrodes (5/82) |
| NE M 2-1T |
Carbon Steel Forgings for Piping Components
(ASME SA-105 with Additional Requirements) (4/76) Superseded by M 2-21T |
| NE M 2-2T |
Stainless and Low Alloy Steel Forging (ASME SA-182 with Additional Requirements) (4/76) |
| NE M 2-3T |
Carbon and Alloy Steel Welding Fittings
(ASME SA-234 with Additional Requirements) (2/83) |
| NE M 2-4T |
Alloy Steel Forgings (ASME SA-336 with Additional Requirements) (4/76) |
| NE M 2-5T |
Austenitic Stainless Steel Welding Fittings (ASME SA-403 with Additional Requirements) (8/82) |
| NE M 2-6T |
Martensitic Stainless Steel (Type 403)
Forgings (ASME SA-182 with Additional Requirements) (8/82) |
| NE M 2-7T |
Carbon and Alloy Steel Forgings, Vacuum Treated
(ASME SA-508 with Additional Requirements) (4/76) Superseded by M 2-21T |
| NE M 2-8T |
Superseded by M 2-21T
|
| NE M 2-15T |
Nickel-Chromium Alloy Bars, Forgings,
and Forging Stock (ASME SA-637 with Additional Requirements) (3/82)
|
| NE M 2-16T |
Tungsten Forgings (AMS 7897 with
Additional Requirements) (1/72)
|
| NE M 2-19T |
2-1/4%-Chromium, 1%-Molybdenum Alloy Steel Tubesheet Forgings (ASME SA-336 with Additional Requirements) (8/82) |
| NE M 2-21T |
Forgings and Bars for Nuclear and Other Special Applications (ASME SA-654 with Additional Requirements) (4/82) |
| NE M 3-1T |
Carbon Steel Seamless Pipe (ASME SA-106 with Additional Requirements) (4/76) Superseded by M 3-34T |
| NE M 3-2T |
Stainless and Alloy Steel Seamless Tubes (ASME SA-213 with Additional Requirements) (4/76) |
| NE M 3-3T |
Austenitic Stainless Steel Seamless Pipe (ASME SA-376 with Additional Requirements) (4/76) |
| NE M 3-4T |
Nickel Alloy Seamless Tubes (ASME SB-
163 with Additional Requirements) (9/82) |
| NE M 3-5T |
Austenitic Stainless Steel Welding Tubing (ASME SA-249 with Additional Requirements) (4/76) |
| NE M 3-6T |
Austenitic Stainless Steel Pipe (ASME SA-312 with Additional Requirements) (4/76) |
| NE M 3-7T |
Austenitic Stainless Steel Pipe, Large Diameter (ASME SA-358 with Additional Requirements) (4/75) |
| NE M 3-9T |
Nickel-Iron-Chromium Alloy Seamless
Pipe and Tubing (ASME SB-407 with Additional Requirements) (3/82) |
| NE M 3-11T |
Carbon and Low Alloy Steel Welded Pipe
(ASME SA-155 with Additional Requirements) (5/75) Superseded by M 3-34T |
| NE M 3-12T |
Seamless Ferritic Alloy Steel Pipe
(ASME SA-355 with Additional Requirements) (4/76) Superseded by M 3-34T |
| NE M 3-27T |
Seamless and Welded Small Diameter
Austenitic Stainless Steel Tubing (ASTM A632 with Additional Requirements) (8/79) |
| NE M 3-29T |
Nickel-Chromium-Molybdenum-
Columbium Alloy Seamless Tubes (AMS 5589 with Additional Requirements) (4/76) |
| NE M 3-30T |
Nickel-Chromium-Molybdenum-
Columbium Alloy Seamless Tubes (AMS 5590 with Additional Requirements) (4/76) |
| NE M 3-33T |
2-1/4%-Chromium, 1%-Molybdenum Alloy Steel Seamless Tubes (ASME SA-213 with Additional Requirements) (9/82) |
| NE M 3-34T |
Pipe and Tubing for Nuclear and Other Special Applications (ASME SA-655 with Additional requirements) (6/82) (5/82) |
| NE M 4-1T |
Carbon Steel Castings (ASME SA-216 with Additional
Requirements) (4/76) (Superseded by NE M 4-6T) |
| NE M 4-2T |
Austenitic Stainless Steel Castings (ASME SA-351 with Additional Requirements) (4/76) (Superseded by NE M 4-6T) |
| NE M 4-4T |
Alloy Steel Castings (ASME SA-217 with Additional
Requirements) (4/76) (Superseded by NE M 4-6T) |
| NE M 4-6T |
Steel Castings for Nuclear and Other Special Applications (ASME SA-613 with Additional Requirements) (6/82) |
| NE M 5-1T |
Stainless Steel Plate Sheet and Strip (ASME SA-240 with Additional Requirements) (11/74) |
| NE M 5-2T |
Carbon Steel Plates (ASME SA-516 with Additional
Requirements) (4/76) |
| NE M 5-3T |
Low Alloy Steel Plates (ASME SA-533 with Additional
Requirements) (4/76) |
| NE M 5-4T |
Nickel-Chromium-Iron Alloy Plate, Sheet,
and Strip (ASME SB-168 with Additional Requirements) (3/82) |
| NE M 5-5T |
Superseded by M 5-23T (9/77) |
| NE M 5-20T |
Nickel-Chromium-Molybdenum-
Columbium Alloy Plate, Sheet, and Strip (AMS 5597 with Additional Requirements)
(w/Amendment 1) (11/75) |
| NE M 5-21T |
Nickel-Chromium-Molybdenum-
Columbium Alloy Plate, Sheet, and Strip (AMS 5596 with Additional Requirements) |
| NE M 5-23T |
Steel Plates for Nuclear and Other Special Applications (ASME SA-647 with Additional Requirements) (3/82) |
| NE M 6-1T |
Alloy Steel Bolting Material for Low-
Temperature Service (ASME SA-320 with Additional Requirements) (2/82) |
| NE M 6-2T |
Mechanical Locking Devices (w/Amendment 1) (10/71) |
| NE M 6-3T |
Allow Steel Bolting Materials for High-Temperature Service (ASME SA-193 with Additional Requirements) (9/82) |
| NE M 6-4T |
Alloy Steel Nuts for Bolting for High-Pressure and High-Temperature Service (ASME SA-194 with Additional Requirements) (9/82) |
| NE M 6-6T |
High-Strength, High-Temperature Bolting Materials (ASME SA-543 with Additional Requirements (2/82) |
| NE M 7-1T |
Martensitic Stainless Steel (Type 403)
Bars (ASTM A276 with Additional Requirements) (3/82) |
| NE M 7-2T |
Nickel Alloy Bar, Rod and Forgings, Precipitation Hardening
(ASTM A461 with Additional Requirements) (7/71) |
| NE M 7-3T |
Alloy Steel Bars and Shapes (ASME SA-479 with Additional Requirements) (8/82) |
| NE M 7-4T |
Nickel-Chromium-Iron Alloy Rod and Bar
(ASME SB-166 with Additional Requirements) (8/82) |
| NE M 7-6T |
Precipitation-Hardening Stainless Steel
Bars, Shapes, and Forgings (ASME SA-564 with Additional Requirements) (9/82) |
| NE M 7-7T |
Cobalt-Chromium Alloy Bars and Shapes (1/81) |
| NE M 7-8T |
Nickel-Chromium-Iron Alloy Wire (AMS
5687 with Additional Requirements) (7/71) |
| NE M 7-12T |
Nickel Wire (3/70) |
| NE M 7-13T |
Ceramic-Insulated Magnet Wire (7/70) |
| NE M 7-23T |
Austenitic Stainless Steel Bar for Core
Components (2/82) Replaced by ASTM A831-84 |
| NE M 8-1T |
Helical Age-Hardenable Nickel-Chromium-
Iron Alloy Springs (1/81) |
| NE M 9-1T |
Nickel-Chromium-Iron and Austenitic Chromium-Nickel
Alloy Seals (10/73) |
| NE M 9-2T |
Superseded by M 9-1T (10/73) |
| NE M 11-1T |
Non-Metallic Seal Materials (2/69) |
| NE M 11-2T |
Impregnated Asbestos Packing Material (2/69) |
| NE M 12-1T |
Test Requirements for Thermal Insulating Materials for Use on Austenitic Stainless Steel (10/72) Replaced by ASTM C692-77 and C629-80 |
| NE M 12-2T |
Calcium Silicate Block and Pipe Thermal Insulation (ASTM C 533 with Additional Requirements) (6/71) Replaced by ASTM C533-72, C795-77, and C929-80 (10/72) |
| NE M 12-3T |
Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement (ASTM C 449 with Additional Requirements (10/71) Replaced by ASTM C449-77, C795-77, and C929-80 |
| NE M 12-4T |
Reflective Insulation (W/Amendment 1) (10/74) |
| NE M 12-5T |
Thermal Insulation, Flexible or Molded,
High Temperature, Low Conductivity (w/Amendment 1) (4/73) |
| NE M 12-6T |
Mineral Fiber Thermal Insulation, High-Temperature, Rigid, Flexible, and Loose Fill (ASTM C 612 with Additional Requirements) (3/73) |
| NE M 13-1T |
Sodium Purchase Specifications (9/73) Replaced by ASTM C1051-85 |
| NE M 14-1T |
Sodium Cover Gas - Purchase Specifications (w/Amendment 1) (1/75) |
| NE M 14-2T |
Fuel and Control Assembly Tag Gas |
| NE M 17-1T |
Sodium Carbonate, Low-Chloride Fire Extinguishing Agent (w/Amendment 1) |
| NE P 3-1T |
Electric Penetration Assemblies in
Containment Structures (IEEE 317 with
Additional Requirements)(1/79) |
| NE P 4-1T |
Electric Heaters - Simulated LMFBR Fuel Pins (3/72) |
| NE P 4-3T |
Metal-Sheathed, Mineral-Insulated Electric Resistance Heaters (3/75) |
