Code Owner: Department of Energy, Office of Emergency Operations and Lawrence Livermore National Laboratory (LLNL)
Description: The HotSpot Health Physics Code is used for safety-analysis of DOE facilities handling nuclear material. Additionally, HotSpot provides emergency response personnel and emergency planners with a fast, field-portable set of software tools for evaluating incidents involving radioactive material. HotSpot provides a fast and usually conservative means for estimation of the radiation effects associated with atmospheric release of radioactive materials. The HotSpot atmospheric dispersion models are designed for near-surface releases, short-range (less than 10 km) dispersion, and short-term (less than 24 hours) release durations in unobstructed terrain and simple meteorological conditions.
HotSpot includes four general models of atmospheric dispersion and depositions: Plume, Explosion, Fire, and Resuspension. These models estimate the downwind radiological impact following the release of radioactive material resulting from a continuous or puff release, explosive release, fuel fire, or an area contamination event. Additional programs deal specifically with the release of plutonium, uranium, and tritium to expedite an initial assessment of accidents involving nuclear weapons.
HotSpot incorporates Federal Guidance Reports 11, 12, and
13 (FGR-11, FGR-12, FGR-13) Dose Conversion Factors (DCFs)
for inhalation, submersion, and ground shine. FGR-12 DCF values
are used for submersion and ground shine. In addition to the
inhalation 50-year Committed Effective Dose Equivalent DCFs,
acute (1, 4, 30 days) DCFs are available for estimating deterministic
effects. This acute mode can be used for estimating the immediate
radiological impact associated with high acute radiation doses
(applicable target organs are the lung, small intestine wall,
and red bone marrow).
DOE completed an evaluation of Hotspot V2.07.1 in March 2007, which was based upon the DOE's safety software quality assurance criteria defined in DOE G 414.1-4. The results of the evaluation were documented in a report with recommendations. LLNL completed implementing recommendations identified. Subsequently DOE approved HotSpot V2.07.1 for inclusion in the Central Registry in June 2010. HotSpot V 2.07.1 now includes a module that can be used to calculate the 95th percentile of the dose distribution for up to 20 radial centerline distances in each of 16 wind direction sectors (direction dependent), and all 16 sectors (direction independent) using historical meteorological data input by the user. Default percentile values are 50th, 90th, 95th, 99th, and 99.5th, and can be changed by the user.
For more information on the Central Registry contact Subir Sen.
Reports and publications related to Hotspot:
The HotSpot Heath Physics Code V2.07.1 User's Guide is available on the HotSpot web site.
Hotspot Support and Obtaining Hotspot:
This page was last updated on December 10, 2012